![]()
The alloy is made from cobalt powder of thick particles through burning in the vacuum, thus increasing its wearing resistance and prolonging its service life.
Body is Alloy steel selected after heat treatment, and with High strength, Tips is made by Low press Sintered, and Suitable Grade Selected according to the Target Projects, Which are to make sure the good performance during working.
The products adapt to the machine with all the performance features such as a high feed rate, a long service life and short tool changing times. Together with the parts supply assurance, a high daily production volume, and above-average economy is guaranteed.
Regular road milling for hard asphalt and concrete conditions.
This cutter is widely used for maintaining construction of top course including high-grade highway, municipal road, airport, public square and so on. The main construction object is asphalt mixture road surface, it is also used to the napping process of the cement concrete road surface. It applies to road renovation, pavement and repair, and also to mill the road and public square. It used to milling the ditch and dadoing the gutter.
Kennametal Road Rehabilitation
RP01 RP06 RP05 PR07 RP19 RP20 RP23 RP26 RP10 RP11 RP12 RP13 RP15 RP16 RP17 RP18 RP24 RP25 RP27 RP28 RP30 RP31 RP21 RP22 RPM10 RPM18 RS19D RS18 RZ05 RZ07 RZ08 RZ19 RZ20 RZ16 RZ24 RZ25
M1 M2 M3 M4 K6 C3KBF RS01 RS04 RS06 RS10 RS12 RS19 RS20 RS14 RS16 RS18 RW01 RL03 RL06 RL07 RL08 RL09 RL10 RL11 SR01 SR02 SR03 SR04 SM01 SM02 SM03 SM04 SM06 SM07
F3 F4 K7 C3KBFVS RS08 RS02 RS05 RS07 RS13 RS25 RS15 RS17 C3KLRVS RL02 RL04 RL06W RL07W RW01W CS2 CM41 CM42 CMB4 CM61 CM63 CMB6 CMB6L
Block and holder
KPF201 BLOCK KPF200 BUSHING KPF301 BASE KPF301 SLEEVE KPF400 BLOCK KPF400 BASE QC100 BASE QC110HD BLOCK QC110B BASE QC110H HOLDER C10AMC BLOCK C10LG BLOCK C10AM/LG BASE C10 BLOCK C10HD BLOCK C10H BLOCK C87HDS BLOCK C RS04W RS12W AR350T AR350ST CH31SR AR35 BLOCK AR30C BLOCK VTT 250 CUTTER VTT 251 CUTTER VTT 30 LOCK WASHER VT 30HP BLOCK
AR150 87 AR150 87ST C87B BLOCK KBB250 BLOCK KB250 KB250ST TOOTH C87RL CM10AM/LG C87E
Hydraulic Milling Cutters
BGS09 BGS16 BGS17 BGS20 BGS66 BGS80 BGS88 BGS89 BGS90 BSR58 BHR35 BHR94 BSR78 BSR63
WIRTG Rhino Cutter Bits
WM1/13 WM4/13 W1-10R W1-13R W1-15R W4ER W5ER W6R W6HR W6AOCR W6HRP W6SR W6SGR WRER W6EHR W7ER W7EHR W8EHR W1-13/22R W1-17/22R W6/22R W6SG/22R W8/22R WR6-SG WR8-E WR-15 W4/13 W1-8/13 W4-G/20 W5-G/20 W5/20W5L-20 W6-G/20 W6/20 W6L-G/20 W6L-20 W6M/20 W6ML-G/20 W7-G/20 W7/20 W8M-G/20 W8M/20 W1-10-NG/20 W1-10-G/20 W1-12-G/20 W6-V/20 W6C-V/20 W6/22 W6-T/22 W6C/22 W8/22 W6C/25 W8/25 W1-13/22 W1-17/22 W1-13-S/25 W1-15-S/25 W1-15/25 W1-19/25 WSM1-13-77/38/30LR WSM1-15-77/38/30LR WSM-13-42E WSM1-15-77/42 WSM1-15-90/38/30CR WSM1-17-77/38/30LR WSM1-17-77/42 WSM1-17-77/42LR WSM1-17L-90/37/29CR WSM1-19-77/38/30LR WSM1-19-77/42 WSM-19-42EP WSM-22-42E WSM1-22-77P/42 WSM1-25-77P/42 WSM-25-42E WSM-22 WSM-25 WSM1-27-85VP/42 WSM2-17-90P/42
